IT Knowledge Base
How can I set up my notebook or other device to use LetNet wireless?[MOVED]
| Author: Scott Case Reference Number: AA-00126 Views: 3510 Created: 08-11-2009 12:00 am Last Updated: 05-13-2013 04:53 pm | 0 Voters |
 |
Setting up your device for LetNet Wireless
- Make sure your computer and wireless network card support PEAP authentication.
- Change the name of your computer or device so that it matches your LetNet username
- Be familiar with the LetNet Policies and Procedures
- Configure your network card using the following basic settings for connecting to LetNet Wireless, or choose your operating system/platform from the links below for more specific information where applicable.
- Use your LetNet user name and password to authenticate to establish your wireless connection.
 |
 |
 |
 |
| Apple OS X |
Windows Vista |
Windows XP |
Apple iPhone/iPod Touch |
Basic settings for connecting to LetNet Wireless (applicable to all operating systems and platforms)
SSID: letnet (must be all lowercase)
Network Authentication: WPA2 Enterprise
Data Encryption: AES
Authentication Type: PEAP
802.1X: Enabled
Supports: 802.11a/b/g/n
OLDER LAPTOPS AND DEVICES (if your device does not support WPA2/AES):
SSID: letnet-legacy (must be all lowercase)
Network Authentication: WPA Enterprise
Data Encryption: TKIP
Authentication Type: PEAP
802.1X: Enabled
Supports: 802.11a/b/g
Related Articles
Comments -
There are no comments for this article.