Dr. Yoni Adonyi Additional Publications

Dr. Yoni AdonyiDr. Yoni Adonyi

Professor Emeritus, and Materials Joining Engineering

Email: YoniAdonyi@letu.edu


Refereed Journal Papers

  • Baumer, R., Adonyi, Y., 2009, “Transients in High Frequency Welding of Advanced High Strength Steels, Welding Journal Research Supplement, October 2009.
  • Adonyi, Y., ”Undergraduate Research at LeTourneau University”, Welding Journal, Vol (4) , pp. 40-44, April 2007
  • Pletcher, B., Adonyi, Y., “Physical Simulation of Widmanstatten Ferrite Formation in ASTM 4130 Steels”, submitted for publication, Acta Met, April 2004.
  • Pletcher, B., Adonyi, Y., “Effects of Flame Reheating on the Properties of TMCP High Performance Steels”, submitted for publication, Welding Journal, April 2003.
  • Atkins, G., Thiessen, D., Adonyi, Y., 2000 – “Welding Process Effects on Weldability Testing of Steels”, Welding Journal, Research Supplement, Vol. April 2002.
  • Baysore, J., Williamson, M., Adonyi, Y., Milian, J.,- “Laser Welding Parameteric Effects on the Formability of Welded Blanks”, Welding Journal, Research Supplement, Vol. 74 (10) Oct 1995, pp. 345s-352s.
  • Kimchi, M., Adonyi, Y., Brewer, P., 1995 - “Weldability of Hot-Dipped Tin Coated Steel Sheet”, Welding Journal, Volume 74, No. 6, June 1995, pp. 31-38.
  • Adonyi, Y., Richardson, R. W., Baeslack, W. A., 1992, “Investigation of Arc Force Effects in Subsurface GTA Welding,” Welding Journal, Research Supplement, Vol 29, Sept. 1992, pp. 321s-330s


Refereed Proceedings Articles

  • Swenson,J, Adonyi, Y., Warke, R.W. 2008, “Dynamic Recrystallization Effects in High Frequency Welding of Steels” Proceedings at the 8th International Conference on Tends in Welding Research, Calloway Garden
  • Adonyi, Y., Jurko, V. Lesko, A.,– “Modeling Hybrid Joining of Advanced High Strength Steels”, Proceedings of the Materials Science and Technology (MS&T 2007) Conference, Detroit, MI pp. 77-87, 2007.
  • Németh, F., Adonyi, Y., Gorelová, M., Leško, A “Fractographic Evaluation of CrNiFe Centrifugally Cast Tube Failure”, Slovak Metallurgical Society Conference, Oct. 17-20, 2006, High Tatras, Slovak Republic.
  • Adonyi, Y., Jurko, V.,– “Hybrid Welding Technology for Advanced High Strength Steels”, Proceedings of the Materials Science and Technology (MS&T 2006) Conference, Cincinnati, OH, pp. 47-59. 2006
  • Orosz, Cs, Palotas, B., Adonyi, Y., 2006 “Numerical Analysis of Weldability of TRIP Steels” First South-East European Welding Congress, IIW, May 24-36, Timisoara, Romania
  • Atkins, G., Ryan, D, Adonyi, Y., 2002 –“Physical Simulations of Solid/Liquid Bimetallic Interfaces”, Proceedings at the 6th International Conference on Tends in Welding Research, Pine Mountain, GA, April 2002
  • Adonyi, Y., Palotas, B., Orosz, Cs., 2005 – “Advanced High Strength Steels…”, Proceedings at the 7th International Conference on Trends in Welding Research, Pine Mountain, GA, May 2005


Conference Presentations / Papers

  • Adonyi, Y., Warke, R., Taylor M: 2010. “Joining of Thermoelectric Elements for High Temperature Applications, 90th Annual American Welding Society Welding Conference, Atlanta, GA, Nov 2010
  • Adonyi, Y., Smith., J. 2010. “Oxygen Contamination Effects on N-Cr Overlay Arc Welding” MS&T Conference, Houston, TX, October 2010
  • Adonyi, Y., Wolbert, S., Smith, J. 2009. “Arc Waveform and Contamination Effects in Ni-Fe-Cr overlays” American Welding Society Welding Conference, Chicago, Il, Nov 2009
  • Cadman, J., Warke, R, Adonyi, Y., 2007. “Numerical Modeling of High Frequency Induction Welding of Advanced High Strength Steels, 88th Annual AWS/Fabtech Conference, Chicago, Il, Nov 14, 2007
  • Orosz, Cs, Palotas, B., Adonyi, Y., 2006 “TRIP acélok hegesztési vizsgálatai” (Weldability Testing of TRIP Steels), Hegesztes Technika, XVII Evfolyam, 2006, 3 szam, pp. 23-27, Budapest, Hungary
  • Adonyi, Y., 2006 – “Heat-Affected Zone Characterization by Physical Simulation”, Welding Journal, Oct 2006, pp. 42-47
  • Adonyi, Y., “Generic Issues in Weldability of High Performance and Advanced High Strength Steels” AWS/Fabtech Show, Chicago, 2005
  • Adonyi, Y., “Welding Engineering and the Global Village”, Opinion Article, Welding Journal, pp. 22-23, September 2003.
  • Adonyi, Y., Marsden, K, “Physical Simulation of Bimetallic Centrifugally Cast Interfaces”, Proceedings at the 43rd Annual Conference of the Iron and Steel Institute, Charlotte, NC, Oct. 28-30, 2001.


Published Reports

  • Advanced High Strength Steel Sheet Joinability Problem Definition,” submitted to the Auto Steel Partnership, Detroit, MI
  • Steel Framed Parking Structures: Stud Welding Thru Deck, Proof-of-Concept Testing,” submitted to the American Institute of Steel Construction (AISC)


Professional and Scholarly Affiliations

  • American Welding Society (AWS), Member since 1983
  • Technical Papers Committee (TPC), Principal Reviewer since 1997, Poster Committee Chair, Vice Chair of TPC 2002-2005
  • B.5 Qualification Committee Member, Certified Welding Inspector (CWI)
  • East Texas Section Chairman (1999-2002)
  • US Vice Delegate at the International Institute of Welding, Commission XIV, Education
  • Professional Engineer, State of Texas


Professional Licenses or Certifications

  • Professional Engineer #87240, Texas Board of Professional Engineers